Press Release Archives

3/31/06 - Pacific Wireless Announces the Release of New 900MHz Vertically Polarized Sector Antenna
Pacific Wireless today announced the release of the new 900MHz vertically polarized sector antenna, SA9-120-13. The non-line of sight sector antenna features a generous 120 degree horizontal beamwidth, 13dBi gain and operates in the 860 to 960MHz frequencies. Read More

2/14/06 - Pacific Wireless Announces the Release of wide band Yagi Antenna line for 860-960MHz
Pacific Wireless today announced the release of the new wide band 900MHz Yagi antenna line. The Yagi antennas are available in 9, 11 and 13dBi and operate in the 860 to 960 MHz frequency range. Read More

12/14/05 - Pacific Wireless Announces the Release of New Grid Dish Gain Booster Antenna for Motorola Canopy^TM Products
Pacific Wireless today announced the release of the Grid Dish Gain Booster Antenna for Motorola Canopy^TM products. The gain booster antenna works for Motorola gear in the 2.4GHz to 5.8GHz frequency ranges with gains ranging from 15 to 29dBi. Read More

11/18/05 - Pacific Wireless Announces the Release of New 2.4GHz Circular Polarized Antenna
Pacific Wireless today announced the release of the new 2.4GHz circular polarized antenna. The CP24-12 features a tight 37 degree beamwidth at 12dBi. The outdoor antenna is equipped with a standard N Female connector and stainless steel adjustable tilt bracket. The CP24-12 is DC grounded for lightning protection. Read More

9/21/05 - Pacific Wireless Announces the Release of New 3.5GHz Parabolic Grid Dish Antenna
Pacific Wireless today announced the release of its newest edition to its 3.5GHz product line, the 3.5GHz parabolic grid dish antenna. The addition of the grid dish antenna expands a 3.5GHz product line which includes flat panel directional antennas and solid parabolic dish antennas. Read More

9/01/05 - Pacific Wireless Announces the Release of New Flagpole 900MHz Stealth Antenna
Pacific Wireless today announced the release of the new 900MHz FlagTennaTM – an 11dBi Omnidirectional base station antenna cleverly disguised as a flagpole. Flagpole components are commercial grade with an attractive satin finish and are available in 35’ and 50’ (the antenna adds 10’ in overall height). The antenna section has a 1 degree electrical downtilt feature which ensures adequate wireless coverage close to the antenna. Read More

8/10/05 - Pacific Wireless Announces the Release of New NLOS Series™ 15dBi 900MHz Parabolic Grid Dish Antenna
Pacific Wireless today announced the release of an all new 900MHz grid dish antenna. The GD9-15 features high gain and low wind loading with a patented wire grid design. The grids are rugged and waterproof and may be vertically or horizontally polarized. Read More

8/5/05 - Pacific Wireless Announces the Release of New 5GHz Dual Polarity Solid Parabolic Dish Antenna
Pacific Wireless today announced the release of its newest edition to its DA5 series of solid parabolic dish antennas. The dual polarity feed system of the new DA5x-27-DP antenna features two ports, one for vertically polarized signals and one for horizontally polarized signals. This is useful for polarization diversity systems and also for increased bandwidth systems which transmit and receive on both H and V polarities. Read More

6/22/05 - Cushcraft Corporation of Manchester NH today announced the acquisition of Pacific Wireless Incorporated of Salt Lake City Utah.
Pacific Wireless will continue to be operated by the founder and current management team under their existing brand as a division of Cushcraft Corporation. Customers, partners and suppliers will continue to work with Pacific Wireless in accordance with current business arrangements.Read More

5/25/05 - Pacific Wireless Announces the Release of New Line of 3.5GHz Solid Parabolic Dishes
Pacific Wireless today announced the release of its new line of Solid Parabolic Dish Antennas for the 3.5GHz frequency. High gain models in 24dBi and 27dBi are available. The dishes come equipped with an integrated N Female connector and may be horizontally or vertically polarized.Read More

5/23/05 - Pacific Wireless Announces the Release of MultiSector™ Sectorized Omni Antennas
Pacific Wireless today announced the release of its new MultiSectorTM Sectorized Omni Antenna. The SO24 series antennas are a sector antenna array packaged in a unique integrated radome with single point mounting system. Read More

5/23/05 - Pacific Wireless Announces the Release of New Power Over Ethernet Midspan Power Supply/Inserter
Pacific Wireless today announced the release of its new Power Over Ethernet Midspan Power Supply/Inserter. The POE-48iD is an advanced 802.3af compliant device with Midspan Intelligent Detection that does not turn on power until it detects a valid POE signature from the devices attached downstream on the Ethernet cable.Read More

05/20/05 - Pacific Wireless Announces the Release of Mesh Series™ Vertically Polarized Omni Antennas for 2.4GHz to 5.8GHz
Pacific Wireless today announced the release of its new Mesh SeriesTM VPOL Omni Antenna line. The antenna line features omnidirectional antennas in the 2.4GHz to 5.8 GHz frequencies with gains ranging from 5dBi to 12dBi.Read More

04/22/05 - Pacific Wireless Announces the Release of 14dBi 180 Degree Vertically Polarized Sector Antenna for 2.4GHz
Pacific Wireless is pleased to announce the latest in its release of Vertically Polarized Sector Antenna systems – SA24-180-14. The Pacwireless VPOL Sector antenna systems are constructed of UV stable fiberglass radomes for extremely long service life in the most demanding conditions. Read More

04/19/05 - Pacific Wireless Announces the Release of IP68 Rated Outdoor Ethernet Connector System
Pacific Wireless is pleased to announce the latest in its release of water proof antenna accessories, the RJ45 Ethernet Connector System. The Patent Pending RJ45-ECS connector system exclusively from Pacific Wireless is a field replaceable outdoor rated and shielded Ethernet connection system for high speed 10BaseT, 100BaseT and 1000BaseT networks. The system features a shielded RJ45 Receptacle mounted in a UV protected and waterproof housing and a mating cable gland which passes an RJ45 connector and seals the cable to IP68 requirements. Read More

3/08/05 - Pacific Wireless Announces the Release Nema 6 Rated Waterproof Die Cast Aluminum Enclosure
Pacific Wireless today announced the release of its new Die Cast Enclosure which will provide a weatherproof solution for network managers and installers to house their costly and weather-sensitive equipment in a secure environment. The DCE includes 6 engineered hole knockouts which allow for many different configurations of connectors and feedthru’s without the need for drilling holes. The knockouts are easily removed using a center punch and hammer. The enclosures have Qty 4 threaded ¼" tall standoffs in the base for mounting a user plate, which in turn can hold the users electronics. This configuration provides universal mounting which is fully customizable by the user. The useable inside dimensions of the DCE is 7.125" x 6.125" x 2". Read More

2/17/05 - Pacific Wireless Announces the Release of the 5GHz RooTennaTM Wideband Compartment Antenna
Pacific Wireless today announced the release of their latest installment of the popular RooTennaTM line. The RooTenna58TM wideband panel antenna is developed to allow integration of the customers’ radio equipment inside the weatherproof compartment. The antenna features a wide frequency range of 5150 to 5825 MHz with 19dBi of gain. The RooTenna58 TM may be mounted for vertical or horizontal polarization and features a balanced16 degree beamwidth. Read More

2/17/05 - Pacific Wireless Announces the Release of the New Low Cost 180 Degree 2.4GHz VPOL Sector Antenna
Pacific Wireless is pleased to announce the release of their new 2.4GHz 180 degree vertically polarized sector antenna. The 180 degree sector antenna system is constructed of a UV stable fiberglass radome for extremely long service life in the most demanding conditions. The 10 deg vertical beamwidth allows for good consistent signal coverage from 0 to over 12 miles. The lite gray color blends well in most any environment. Read More

2/3/05 - Pacific Wireless Announces the Release of New Cable Assembly Line
Pacific Wireless today announced the release of its new CA178 Cable Assembly Line. The CA178 cable assemblies offer a consistent low loss design construction. Read More

1/19/05 - Pacific Wireless Announces the Release of 5GHz 12dBi Omni Directional Antenna
Pacific Wireless today announced the release of its new omni directional antenna which operates in the 5470 to 5850 MHz range. The OD58 antenna is available in a 12 dBi gain model.Read More

12/01/04 - Pacific Wireless Announces the Release of New DC to 6GHz Coaxial Surge Protectors
Pacific Wireless today announced the release of its new Coaxial Surge Protectors for DC to 6GHz operation. The surge protectors offer ultra fast discharge with a maximum insertion loss of .2dB at 2.4GHz and .4dB at 5GHz. Read More

10/8/04 - Pacific Wireless Announces the Release of New MCX-RPSMAF Adapter
Pacific Wireless today announced the release of the new AD-MCX-RPSMAF adapter. The adapter is intended for special Apple AirPort™ applications and allows use of various antennas on the Apple product.Read More

10/4/04 - Pacific Wireless Announces the Release of Grid Dish Bandpass Filtered Parabolic Antenna
Pacific Wireless today announced the release of its new Grid Dish Bandpass Filtered Parabolic Antenna. The 2.4GHz Bandpass Filtered antennas utilize a patented grid design and patented high performance dipole feed with patent pending Bandpass Filter technology which reduces out of band noise. Read More

9/24/04 - Pacific Wireless Announces the Release of the New 29dBi 5GHz Grid Dish Antenna
Pacific Wireless today announced the release of its latest addition to the 5GHz Grid Dish series - the 29dBi GD58-29 Grid Dish Antenna. Read More

9/16/04 - Pacific Wireless Releases Technical Notes
Pacific Wireless today announced the release of technical notes for the following: Enclosure Temperature Rise, Enclosure NEMA Ratings and IP Class Waterproofing, Base Station Antenna Isolation. Read More

8/10/04 - Connex Wireless Announces the Release of its Diversi-Tenna high performance space diversity antenna system
conneX, the home and office networking division of Pacific Wireless, today announced the release of a new 2.4GHz Space Diversity Antenna System for indoor wireless networks. The antenna system features a pair of high gain omnidirectional antennas. The antennas feature a rubberized magnetic weighted base for non-skid and non-scratch mounting on any desktop or magnetic surface. With the included mounting kit, the antennas can be mounted to windows, walls or ceilings. The antennas have 5 foot cables and are available with various connector options (MC Card, MMCX, RPMMCX, RPSMA, RPTNC and U.FL) for universal compatibility. Read More

7/15/04 - Pacific Wireless Releases a New High Gain RooTenna Design
Pacific Wireless today announced the release of its new RT24-18 RooTenna radio compartment high gain antenna. The antenna features 19dBi of gain and a front to back ratio of >30dB. Half Power Beamwidth is 15 deg Vertical and 20 deg Horizontal. The antenna has an integral waterproof radio compartment with a unique universal "breadboard" mounting system for ease of mounting internal components. Cover screws are captive to make it easier to assemble and disassemble. Read More.

6/25/04 - Pacific Wireless Releases a new Universal Wall Mount Bracket
Pacific Wireless today announced the release of a the WMB Universal Wall Mounting Bracket which is capable of supporting antennas weighing up to 35 lbs. Read More.

6/10/04 - Pacific Wireless Releases its GD57 Series 5.4-5.7GHz Parabolic Grid Antenna Line
Pacific Wireless announces the release of a new line of parabolic grid antennas for the European and North American 5.4 - 5.7GHz wireless broadband market. The aesthetically designed antennas feature a unique patented reflector design which exhibits great RF performance while providing very low wind loading. The semi-parabolic design exhibits narrow beamwidths and improved interference rejection. Antenna assembly is made faster with the use of stainless steel carriage bolts. Read More.

6/09/04 - Pacific Wireless Announces Two Point Stainless Steel Bracket System for its Sector Antennas
Pacific Wireless today announced the offering of a new bracket system option for its line of horizontally polarized sector antennas. In addition to the new 2 point stainless steel bracket system, customers still have the option to purchase the sector antennas with the original single point bracket system which is useful for pole top mounting. Read More.

6/01/04 - Pacific Wireless Releases a new "Carrier Class" Power Over Ethernet (POE) Adapter System
Pacific Wireless today released its new Power Over Ethernet adapter solution for providing electrical power to remote devices via CAT5 Ethernet cable. Read More.

4/30/04 - Pacific Wireless Releases a new Universal Connector Adapter Kit
Pacific Wireless today announced the release of it’s new WIPS-Global Universal Connector adapter kit, Part Number AD-KIT-UNI. The kit allows a low loss connection from virtually any type of wireless connector to any other type of connector including the popular reverse polarity types. The gold plated connectors assure good performance over a long life. Read More.

4/15/04 - Connex Wireless Announces the Release of Its MicroMag MM24-5RD Desktop/Wall Mount Antenna
conneX, the home and office networking division of Pacific Wireless, today announced the release of a new 2.4GHz high gain Desktop Antenna. The MicroMag MM24-5RD features a 5.5dBi gain omnidirectional antenna for better indoor performance.Read More.

4/12/04 - Connex Wireless Announces the Release of Its ROVER24-5RD Laptop/Notebook Antenna
conneX, the home and office networking division of Pacific Wireless, today announced the release of a new 2.4GHz high gain Laptop and Notebook Antenna. The ROVER24-5RD features a fold down 5.5dBi gain omnidirectional antenna for the ultimate in portable performance and transportability. Read More.

3/31/04 - Pacific Wireless Announces the Formation of its New Home and Office Networking Division, Connex Wireless.Pacific Wireless, a leader in the manufacture of antennas for the wireless broadband market, today announced the formation of a new division dedicated to developing and marketing high quality wireless products geared toward the home and office user. The new division will concentrate on products that will enhance existing networks and allow users to take full advantage of available wireless technologies.Read More

3/31/04 - Pacific Wireless Releases its IN24/58 TriBand Rubber Duck Omnidirectional AntennaPacific Wireless today announced the addition of a new TriBand rubber duck omnidirectional antenna to its ApXtender Series product line. The indoor rubber duck features triband operation at 2.4GHz, 5.3GHz and 5.8GHz. The antenna features an outstanding 5dBi gain at 5.8GHz. With its high performance tri-band capability, a single antenna can be used in 3 different wireless applications, thus reducing the number of part numbers equipment manufacturers need to keep in stock. It is also a perfect match for wireless equipment with dual band or tri-band capability. Read More

3/1/04 - Pacific Wireless Releases its IN800/2500 TriBand Ceiling Mount Omnidirectional Antenna Pacific Wireless today announced the addition of a new high gain TriBand omnidirectional antenna to its INWAVE SERIES^TM product line. The indoor ceiling mount antenna features an outstanding 5dBi gain at 2.4GHz. It operates from 800MHz to 2.5GHz so only one antenna is required for in-building cellular telephone and WLAN/WiFi installations. The antenna is manufactured from UL listed materials in an aesthetically pleasing form which blends well in any building environment. Read More

1/15/04 - Pacific Wireless Releases its GD58 Series 5.8GHz Parabolic Grid Antenna Line Pacific Wireless today announced the release of a new line of parabolic grid antennas for the 5.8GHz wireless broadband market. The aesthetically designed antennas feature a unique patented reflector design which exhibits great RF performance while providing very low wind loading. The semi-parabolic design exhibits narrow beamwidths and improved interference rejection. Antenna assembly is made faster with the use of stainless steel carriage bolts. Read More

1/01/04 - Pacific Wireless Releases its PA24 2.4GHz WiFi Panel Antenna Line Pacific Wireless today announced the release of a new line of panel antennas for the 2.4GHz wireless broadband market. The low cost antennas are fully compatible with 802.11b/g standards. Their low profile and aesthetic design make them a good choice for installations where these attributes are critical. Built to last, the unique die cast aluminum bracket system can be used for pole or wall mounting. Read More

9/23/03 - SkyFrames, AeroTech, Pacific Wireless and Solomon Technology Solutions Join Forces to Bring VoIP, Satellite, and Wireless Technology to US Troops in Iraq for the Holidays
SkyFrams, Inc., a provider of low-cost, highly secure satellite broadband Internet services, announced today that it has received the support and generous commitments for donations from AeroTech, PacWireless, and Solomon Technology. These companies will join SkyFrames' grass roots effort to supply IP Telephony services for US troops in Iraq providing them with the ability to call home via VoIP, Wireless and Satellite communications for the holidays. Read More.

12/03/03 - Pacific Wireless participates in Wireless Networking Project in Nepal. In order to bring new opportunities to the people of Nepal, Pacific Wireless recently participated in a project to bring voice and data to remote villages in Nepal. Pacific Wireless 2.4GHz 24dBi Die Cast antennas were used in the long distance connection of remote villages via 802.11b wireless technology. Read More

9/24/03 - Pacific Wireless announces the release of a new line of Connector Adapters. These Ultra Low loss adapters are used to adapt from an N Female antenna or cable connector to a variety of popular connector types. The Adapters feature an N Male connector on one side and a choice of RPSMA Male, RPSMA Female, RPTNC Male and UHF Female on the other side. See our Accessory Page for more information.

8/02/03 - Pacific Wireless announces the release of a new 900MHz 5dBi SlimLine Omnidirectional Antenna to it’s NLOS Series product line. The 5dBi antenna is packaged in a new SlimLine package decreasing the overall size and wind loading of the 900MHz antenna. The stainless steel mounting bracket accomodates poles up to 2" diameter. See our 900MHz omni page for more information.

7/20/03 - Pacific Wireless adds a 6dBi Directional Desktop antenna to it’s APXtender 2.4GHz product line. These products are designed specifically to extend the range of indoor networks. The new 6dBi Directional Desktop is also perfect for CPE equipment. It can be mounted indoors to communicate with an external base station thru a window or wall. The antenna folds for easy transport and can be used for laptop WiFi applications. It comes with MC-Card and MMCX connectors to attach to various PCMCIA WiFi cards. It is also available with RPSMA and RPTNC to attach to PC Cards and Wireless routers. Additional Information.

6/30/03 - Pacific Wireless announces the release of a new 9dBi Omni Antenna with 7 Degrees electrical downtilt to it’s 2.4GHz product line. This antenna is perfect for close-in access point applications such as Apartment Complexes, Industrial Campuses, School Campuses, Truck Stops, Marinas. Mobile Home Parks, Neighborhood Networks, Campgrounds, etc. Because of it’s wide vertical beamwidth and 7 deg electrical downtilt the antenna increases the available signal within 1 mile of the antenna. See our 2.4GHz Omnidirectional page for additional information.

5/1/03 - Pacific Wireless now includes a free weatherproofing kit with all outdoor antenna products. The kit consists of a length of self ammalgamating rubber tape for sealing antenna connections. The self amalgamating tape bonds to itself thru a volcanizing action. When applied correctly, the tape will form a permanent weatherproof coating over the antenna connector to seal out unwanted moisture. Installation takes just a few minutes. Check out our weatherproof tape instructions for more info.

4/23/03 - Pacific Wireless Announces the release of it’s low cost APXtender product line. The APXtender line are range extender antennas for indoor wireless access points, routers and bridges. The 5.5dBi rubber duck antenna replaces the original 2.2dB antenna which comes on most wireless LAN equipment. With it’s 5.5dBi gain it effectively doubles the range of the equipment, giving higher signal levels and increasing speed. The 5dB desktop Omni is perfectly suited for those desktop applications where the antenna needs to be positioned away from the wireless equipment for best signal. It can be positioned on a window sill to increase the signal strength from an outside signal source. A variety of connector options are available. See our APXtender page for more information. Note: Keep an eye out for our new Desktop Directional APXtender coming in the next few months.

4/06/03 - Pacific Wireless Announces the release of a new Bulkhead Mount surge supressor/lightning arrestor series. The Bulkhead surge supressors come with a stainless steel bracket kit for surface mounting. See our Accessory Page for additional information and specifications.

3/31/03 - Pacific Wireless reduces prices on it’s popular PAWUM and PAWUM/L antenna mounts. These mounts have been completely redesigned based on customer feedback New features are a 1.5" diameter pole to allow more antenna mounting options, a heavier gage metal for increased strength, and new holes in the bracket to fit PAW standard UBolts for installations on towers or poles. We have also added a galvanization process before powder coat paint to give extremely long service life. See our Accessory Page for more information.

3/01/03 - Pacific Wireless Announces the completion of it’s new warehouse located at 14568 Center Point Way, Bluffdale, UT. 84065. "With the completion of this new building, we are well positioned to support the huge growth expected in the exciting wireless LAN industry" commented Scott Parsons, Pres/CEO of Pacific Wireless.

1/31/03 - Pacific Wireless Announces the release of it’s new line of 2.4GHz Magnetic Mount Mobile Antenna products. These antennas are especially designed for vehicle mounting. The PAWMA24-5 has an integral magnetic base and is only 6" tall. The PAWMA24-7 has a choice of removeable magnetic bases or a trunk lid mount for reliable mounting to almost any metal surface. See our 2.4GHz Mobile Antenna Page for more Information.

1/17/03 - Pacific Wireless Announces the release of our new line of 2.4GHz Horizontally Polarized Omnidirectional Antenna products. These antennas are excellent alternatives to vertically polarized omnidirectional antennas and complement our existing line of 95 deg horizontally polarized sector antennas. Most interfereing signals that a WISP will encounter from cordless telephones and other 802.11b systems is vertically polarized. Using horizontally polarized antennas gives more than. 25dB cross pole rejection which minimizes the threat of the vertically polarized interference causing system problems. See our 2.4GHz Omnidirectional page for more information.

1/16/03 - Pacific Wireless Announces the release of our new line of PAWSP3 Surge Protector Lightning Arrestors designed for 900MHz and 2.4GHz wireless systems. The ultra fast gas discharge surge protectors will pass energy from a lightning strike safely to ground, thereby preventing damage to sensitive equipment. The lightning arrestors are available in 2 breakdown voltages: 350V and 90V and have two choices of connector configuration: N Fem/N Fem or N Male/N Fem. See our Accessory Page for more information.

12/19/02 - Pacific Wireless Announces the release of our new line of 5.8GHz products starting with our flagship product, a 29dB solid dish antenna system for point to point long distance backhaul applications. This affordable antenna is manufactured with a unique one-step molding process for consistency and long term stability. See our Solid Dish Parabolic Page for more information.

12/17/02 - Pacific Wireless Announces the release of it’s new line of 900MHz products including Yagi, Omnidirectional, Grid Dish Parabolic and Mobile antenna products. This line of antennas complements our expanding line of 2.4GHz products and is engineered for 900MHz Non Line of Sight applications. See our NLOS page for more information.

11/23/02 - Pacific Wireless Announces it’s 2002 Holiday Schedule. Pacific Wireless will be closed for business for the Christmas / New Years holiday from December 23, 2002 to January 3, 2003. We wish the best to you and to your families during this Holiday season.

11/22/02 - Pacific Wireless Announces agreement between Pacific Wireless and Mobile Communications Technology for worldwide promotion of Pacific Wireless products:  Mobile Communications Technology has agreed to promote Pacific Wireless products through it’s online sourcing and information site. Mobile Communications Technology is a premier site for buyers of wireless technology, especially in Europe.Visit our new information page at http://www.mobilecomms-technology.com/contractors/antennas/pacific/index.html

11/22/02 - Pacific Wireless Announces the Consolidation of Facilities to Draper, Utah. Starting Nov 23, 2002, we are moving our warehousing and distribution of wire grid antenna products from our warehouse in Michigan to our Utah warehouse. We will be consolidating all our operations under the same roof in our new building. "We believe this move, although most likely disruptive for the next 4 or 5 weeks, will allow us to better serve our customers in the long run," said Scott Parsons, Pres/CEO of Pacific Wireless.

9/26/02 - Pacific Wireless Announces the Release of it’s new Vagi Series 16dBi Yagi Directional Antennas.  The Vagi Series is a unique low cost 16dBi directional antenna targeted for the wireless broadband market. With it’s high gain, aesthetic styling, low wind loading and easy installation, it is well suited for CPE equipment. Visit our Vagi Series Page for additional information.

9/12/02 - Pacific Wireless partners with Commercial Finding of Utah to provide Equipment Leasing options for customers. "This unique program gives our customers yet another option to protect their precious cash during system roll-outs" said Scott Parsons, President and CEO of Pacific Wireless "Financing equipment purchases will allow Wireless Service Providers to expand their service footprint more quickly and garner more market share in their service areas." Take a look at this unique program. Visit our Financing Page.

8/7/02 - PAW releases the flagship products of it’s new InWave Series of Omnidirectional and Directional Panel indoor antennas. The InWave Series is a line of 3dB Omnidirectional and 10dB directional panel antennas targeted for the indoor 2.4GHz indoor WLAN market. These low cost antennas are aesthetically designed to blend well in any office environment. Check out the specs on our new InWave Series Page.

5/1/02 - PAW releases first member of it’s Echo Series line of directional antennas specifically targeted at High End CPE installations - The Echo Series is an attractive 14dB directional backfire antenna. Because of it’s compact size and aesthetic design, this antenna is well suited for high end customer premises installations. Check out the specs on our Echo Series Page

4/15/02 - PAW releases New Die Cast 24dB directional antenna - This new antenna is constructed of Aluminum Diecast and then powder coat painted with a light grey color to blend well with the surroundings. The antenna comes in two pieces to reduce the box size and save on shipping costs. Check out this antenna on our Directional Antenna Page or contact sales for more information.

4/10/02 - Pacific Wireless announces the immediate availability of leaded dipoles - Due to customer demand we have developed a new line of dipole with 24 inch connectorized pigtail exiting the back of the dipole. The dipole comes in an N Male (PMPF-1P) or an N Female Version (PMPF-1PF) standard. Other connector options are available upon special request. Contact sales or check out our Directional Antenna page for more information.

3/23/02 - Pacific Wireless announces a free shipping promotion as part of it’s expansion to Draper Utah - Free ground shipping is available until April 30th on shipments of 10-50 antennas to locations within the the continental USA

3/23/02 - Pacific Wireless moves operations to Draper Utah - Due to increasing demands for Pacific Wireless products, we have decided to expand our operations to Draper, Utah as of April 1st 2002. "This move will allow us to service our US and International customers more efficiently because of the more central geographic location and time zone and Draper’s close proximity to the strong wireless infastructure of Utah" said Scott Parsons, President and CEO of Pacific Wireless.

10/2/01 - Pacific Wireless announces a new free ground shipping promotion for it's entire line of wireless antennas. The promotion runs from Oct 5 2001 to Nov 15 2001. Continental United States only. 10 antenna purchase minimum, 50 antenna maximum covered by this offer.

8/8/01 - PAW reduces price of it's popular OmniDirectional Antennas - Pacific Wireless announces new pricing on it's line of omnidirectional antennas. "We have been able to make improvements in our manufacturing processes, allowing us to pass significant savings on to our customers", explained Scott Parsons, CEO of Pacific Wireless. New pricing effective immediately. Use our QuikQuote system to check out the new pricing or call 831-684-2474

1/15/01 - PAW introduces 2.4GHz 95 Deg Sector Antennas - Pacific Wireless announces the immediate availability of our new 12dB and 16.5dB 95 Degree Sector Antennas. Antennas feature a rugged aluminum extrusion design and are coated with powder coat paint for a long service life in harsh environments. These antennas are ideal for sectorizing an area into 4 sectors per 360 degrees to allow better control of bandwidth. See our Antenna Page for more information.

9/20/00 -PAW introduces 2.4GHz Omni Directional Antennas - Pacific Wireless announces the immediate availability of our new 9dB and 12dB Omni Directional Antenna Systems. These rugged systems are ideal for point to multipoint wireless internet systems utilizing the 2.4GHz frequency spectrum. See our Antenna Page for more information

4/12/00 -PAW introduces Universal Antenna Mount - Pacific Wireless announces the immediate availability of our new Universal Antenna Mount system for roof and wall mounting of a variety of antennas. This mount is designed for customer premises equipment mounting when a slick, professional appearance is important. See our Accessory Page for more information.

3/8/00 - 24dB Antenna System Price Reduction - Pacific Wireless announces price reductions on 24dB antenna systems. "It is our policy to continuously pass along manufacturing savings to our partners, our customers", remarked Scott Parsons / Pres&CEO. See Antenna QuikQuote for new pricing.

2/23/00 - QuikClamp Bracket - Pacific Wireless announces phase out of the QuikClamp bracket. Due to strong customer demand for the Heavy Duty bracket, we have decided to phase out the QuikClamp style in favor of the Heavy Duty bracket. The QC bracket will still be available by special request but the HD bracket will become our standard offering.

2/23/00 - Extended Warranty - Pacific Wireless announces extension of it’s warranty coverage from 1 year to 2 years. This move reflects our confidence in the quality and reliability of our antenna products.

12/30/99 - Pacific Wireless announces pricing changes on it’s antenna product lines. Significant price reductions are available on purchases over 100 units. See Antenna QuikQuote

11/16/99 - 19dB Antenna Promotion! Starting today and continuing through Jan 1, 2000 Pacific Wireless offers free shipping for any orders of our 19dB antenna products. These antennas are a great alternative to our 24dB product because of smaller size and lower wind loading. Actual gain is nearly 20dB at 2450 MHz. NOTE: This promotion is good for ship-to addresses within the continental United States only. Shipping Method UPS Ground.

10/13/99 - Pacific Wireless announces a new line of accessories beginning with our PAW12018P wall transformer power supply with integrated bias T. The supply provides regulated 18V to roof top equipment through the RF cable. Output=18VDC @ 300MA. Designed for 75 Ohm systems.

8/16/99 - Pacific Wireless announces local warehousing of product for European customers. All antenna products are now stocked at Richardson Electronics, UK. Telephone 44-1753-733010 ; FAX 44-1753-733012.  We believe that this an essential improvement for serving our European customers.

8/10/99 - Pacific Wireless announces new DECT directional antennas for 1.880 GHz to 1.930GHz applications. DECT bands are used for unlicensed point to point communications, primarily in Europe.

8/1/99 - Pacific Wireless releases new product introductions to major telecom trade magazines (Antenna Release) (RFIC Release)

8/1/99 - Pacific Wireless announces new C2306 mixer GaAs RFIC for 2.4GHz downconversion or upconversion applications. The mixer has integrated LO amplifier and IF amplifier for greater design flexibility. Quantity pricing as low as $3.50 each. Contact sales for more information.

5/20/99 - Pacific Wireless improves manufacturing methods and reduces the price of C2304 Downconverter IC. Quantity pricing as low as $4.50 each. Contact sales for more information.

5/10/99 - Pacific Wireless offers new Heavy Duty antenna mounting brackets for poles up to 2.4" (60mm). These brackets allow for adjustable tilt on all antenna sizes. They are heavy galvanized for extremely long field life. This bracket system is a no charge option available on all antenna products. Check out our products page for more information.

5/1/99 - Pacific Wireless names Richardson Electronics Authorized Distributor of it’s line of 2.4GHz GaAs MMIC RFIC’s. (Press Release)

5/1/99 - Pacific Wireless names Richardson Electronics Authorized Distributor of it’s line of ISM/MMDS Parabolic Grid Antenna Products. (Press Release)

3/1/99 -Pacific Wireless now offers the C2304 Downconverter IC designed for the ISM and MMDS markets. This IC was designed to be a cost effective solution for efficient downconversion of 2.4GHz RF to IF frequencies. The chip comes packaged in a standard 14 lead SOIC. Contact sales for pricing and availability.

1/7/99 - Pacific Wireless purchases the Passive Feed Antenna and the 2.4Ghz integrated downconverter MMIC product lines from Pacific Monolithics.

About Us | Products | Support | Where To Buy

Contact | Links | Site Map | Home

© Laird Technologies - All Rights Reserved
Privacy Policy • Returns Policy • Warranty Policy • Shipping Information
1751 Wilkening Ct. • Schaumburg IL 60173
Customer Service: (847) 839-6000